qpa 3 3 20 catv push pull hybrid 1 003 mhz 3 4 db data sheet rev. c , november 2 5 , 2016 | subject to change without notice 1 of 4 www.qorvo.com ? product description the qpa 3 32 0 is a hybrid push pull amplifier module. the part employs gaas / gan die and is operated from 4 0 mhz to 1003 m hz. it provides excellent linearity and superior return loss performance with low noise and optimal reliability. p ackage : sot - 115j product features ? ? ? ? ? ? ? ? applications ? ? ? ? 1003 mhz catv amplifier systems functional block diagram input output v+ ordering information part no. description QPA3320 box with 50 pcs QPA3320
qpa 3 3 20 data sheet rev. c , november 2 5 , 2016 | subject to change without notice 2 of 4 www.qorvo.com ? QPA3320 a bsolute maximum ratings parameter value?/?range rf input voltage (single tone) 7 0 dbmv dc supply over - voltage (5 minutes) + 30 v storage temperature ?40 to 100?c ? ?c electrical specifications parameter conditions (v+= 2 4 v, tmb=30c, zs=zl=75 ? ) min typ max units operational frequency range ? 4 0 ? 1 003 mhz current (i dd ) ? 2 8 0 ma gain f o = 50 mhz 34.0 db gain f o = 1 00 3 mhz 3 4 . 5 3 6 . 5 gain slope 4 0 to 1 003 mhz [ 1 ] 0.5 2.5 gain flatness 4 0 to 1 003 mhz 1 . 0 input return loss f o = 4 0 to 160 mhz 20 ? db f o = 160 to 870 mhz 17 ? f o = 870 to 1 00 3 mhz 16 ? output return loss f o = 40 to 160 mhz 20 ? db f o = 160 to 870 mhz 17 ? f o = 870 to 100 3 mhz 16 ? noise figure f o = 50 to 1 00 3 mhz ? 4 . 5 db ctb vo=4 4 dbmv, flat, 110 analog channels [ 2 ] - 66 - 64 dbc xmod -60 -58 dbc cso -65 -63 dbc 1. the slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency. 2. 110 analog channels, ntsc frequency raster: 55.25mhz to 745 .25mhz, +44 dbmv flat output level . composite second order (cso) - the cso parameter (both sum and difference products) is defined by ansi/scte 6. composite triple beat (ctb) the ctb parameter is defined by ansi/scte 6 . cross modulation (xmod) - cross modulation (xmod) is measured at baseban d (selective voltmeter method), referenced to 100% modulation of the carrier being tested. carrier to intermodulation noise (ci n) - the cin parameter is defined by ansi/scte 17 (test procedure for carrier to noise).
qpa 3 3 20 data sheet rev. c , november 2 5 , 2016 | subject to change without notice 3 of 4 www.qorvo.com ? package drawing (dimensions in m illimeters)
qpa 3 3 20 data sheet rev. c , november 2 5 , 2016 | subject to change without notice 4 of 4 www.qorvo.com ? handling precautions parameter rating standard cui sii i esd? ? ?human body model (hbm) 1 b ansi/esd/jedec js - 001 - 2012 rohs compliance this part is compliant with 2011/65/eu rohs directive (restrictions on the use of certain hazardous substances in electr ical and electronic equipment) as amended by directive 2015/863/eu . contact information for the latest specifications, additional product information, worldwide sales and distribution locations: web: www.qorvo.com tel: 1 -844- 890 - 8163 email: customer.support@qorvo.com important notice the information contained herein is believed to be reliable; however, qorvo makes no warranties regarding the information con tained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. all informatio n contained herein is subject to change without notice. customers should obtain and verify the latest relevant information before placing orders for qorvo products. the information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anythin g described by such information. this information does not constitute a warranty with respect to t he products described herein, and qorvo hereby disclaims any and all warranties with respect to such products whether express or implied by law, course of dealing, course of performance, usage of trade or otherwise, including the implied warranties of merc hantability and fitness for a particular purpose. without limiting the generality of the foregoing, qorvo products are not warranted or authorized for use as critical componen ts in medical, life - saving, or life - sustaining applications, or other application s where a failure would reasonably be expected to cause severe personal injury or death. copyright 2016 ? qorvo, inc. | qorvo is a registered trademark of qorvo, inc.
|
